SEARCH
Speed Queen FF7 White Front Load Washer with Pet Plus Sanitize Fast Cycle Times Dynamic Balancing 5-Year Warranty
Model# FF7009WN
4.5 expand_more40 Reviews
Speed Queen FF7 White Front Load Washer with Pet Plus Sanitize Fast Cycle Times Dynamic Balancing 5-Year Warranty
Model# FF7009WN
Was $2449.99
$2,199.96
- Style:
- Front Load
Flea Removal Cycle
An industry-exclusive cycle that has been designed and tested as a tool in fighting a flea infestation.
Fast Cycle Times
Laundry day doesn't need to be an all-day affair. Speed Queen's fast cycle times put more free time in your day.
Dynamic Balancing
Commercial quality means running all cycles to completion even the most out-of-balance ones. We do this with a combination of commercial components and technology others can't match.
Stain Boost
A new cycle option that will amplify stain removal. Can be used to treat both cold- and warm-based stains, including loads with mixed stains requiring both cold and warm/hot water.
Sanitize with Oxi
We're all concerned about achieving a higher level of clean. With a sanitize with Oxi cycle, you'll have another tool to drive to that goal.
Pedestals Available
Eliminate that aching back...we'll give you a lift...with pedestals to further ease the challenges of laundry day.
5 Year Warranty
You can read all about our five-stage product development process and rigorous testing here, or you can just gain peace of mind through our industry-best warranties.
Commercial Heritage
Our reliability, measured in decades, has been crafted and reinforced for more than a century. When it comes to value, pedigree matters.
National Accolades
We can tell you all about how great and reliable our products are, but maybe we'll let that story be told through national publications, organizations, magazines.
American Quality
For more than 110 years, Speed Queen has produced quality products right here in Ripon, Wisconsin.
| QUICK START MANUAL | Click here to download |
|---|---|
| Quick Specifications | Click here to download |
| USER'S GUIDE | Click here to download |
| ENERGY GUIDE | Click here to download |
| INSTALLATION INSTRUCTIONS | Click here to download |
Enter Your Review:
Fields marked with an asterisk (*) are required.
Showing Page 6 of 7
Impressive Build Quality
by nikoman
Submitted 06-04-23
done Yes, I would recommend this to a friend
SpeedQueen.com
I recently replaced my 21 year old front loader with a Speed Queen (FF7009WN). My old unit was not dead but it was getting old and tired so I'm hoping to get at least the same service life out of this new one. I was looking for an "old school" front load machine which uses more than a cup of water to actually "wash" clothes. That pretty much narrowed it down to only Speed Queen and I was NOT disappointed. If you're looking for the very best front loader to handle all your washing needs without wifi and other frills and gimmicks then this is the machine for you. If you want a fake stainless steel tub surrounded by a plastic outer tub and junk then go buy pretty much any other brand. If you don't believe me about fake stainless steel tubs go run a magnet inside any other washer machine tub and you'll find that it sticks. The internals of this machine is just as beautiful as the outside with real parts that won't fail as soon as the warranty expires, Speaking of warranty, the place I bought this Speed Queen didn't even bother to try and sell me an extended warranty because they said it's a waste of money. I almost fell for the cool wifi options out there and to make things easier by dumping the entire bottle of detergent inside and let the machine automatically do the dosing but these things just create more failure points on the appliance. I also see that the sizes are getting monstrous in washing capacities without increasing the dimensions of the unit - how is this even possible? Well I guess they skimp on the insulation and other important parts which increase longevity. Customer service is top notch with Speed Queen, I've called with questions during the busiest times but they always managed to call me back pretty fast. One last thing, can you imagine the mold growing from all the detergent those machines hold when you dump the whole bottle in it? I never had mold issues with my old unit so I expect to never have a problem my new Speed Queen since I never keep the door closed unless it's washing a load and I always rinse out the soap dispenser. If you follow these simple things you will never have any mold issues which seem to be a downside of having a front load washer. Take care of a Speed Queen and you will have it for decades. The guys who delivered mine told me that they remove old working Speed Queens from peoples homes that are 30-40 years old! That speaks volumes.
Overall Rating:
Performance:
Appearance: 
Value:
Impressive Build Quality
by nikoman
Submitted 06-04-23
done Yes, I would recommend this to a friend
SpeedQueen.com
I recently replaced my 21 year old front loader with a Speed Queen (FF7009WN). My old unit was not dead but it was getting old and tired so I'm hoping to get at least the same service life out of this new one. I was looking for an "old school" front load machine which uses more than a cup of water to actually "wash" clothes. That pretty much narrowed it down to only Speed Queen and I was NOT disappointed. If you're looking for the very best front loader to handle all your washing needs without wifi and other frills and gimmicks then this is the machine for you. If you want a fake stainless steel tub surrounded by a plastic outer tub and junk then go buy pretty much any other brand. If you don't believe me about fake stainless steel tubs go run a magnet inside any other washer machine tub and you'll find that it sticks. The internals of this machine is just as beautiful as the outside with real parts that won't fail as soon as the warranty expires, Speaking of warranty, the place I bought this Speed Queen didn't even bother to try and sell me an extended warranty because they said it's a waste of money. I almost fell for the cool wifi options out there and to make things easier by dumping the entire bottle of detergent inside and let the machine automatically do the dosing but these things just create more failure points on the appliance. I also see that the sizes are getting monstrous in washing capacities without increasing the dimensions of the unit - how is this even possible? Well I guess they skimp on the insulation and other important parts which increase longevity. Customer service is top notch with Speed Queen, I've called with questions during the busiest times but they always managed to call me back pretty fast. One last thing, can you imagine the mold growing from all the detergent those machines hold when you dump the whole bottle in it? I never had mold issues with my old unit so I expect to never have a problem my new Speed Queen since I never keep the door closed unless it's washing a load and I always rinse out the soap dispenser. If you follow these simple things you will never have any mold issues which seem to be a downside of having a front load washer. Take care of a Speed Queen and you will have it for decades. The guys who delivered mine told me that they remove old working Speed Queens from peoples homes that are 30-40 years old! That speaks volumes.
Overall Rating:
Performance:
Appearance:
Value:
Impressive Build Quality
by nikoman
Submitted 06-04-23
done Yes, I would recommend this to a friend
SpeedQueen.com
I recently replaced my 21 year old front loader with a Speed Queen (FF7009WN). My old unit was not dead but it was getting old and tired so I'm hoping to get at least the same service life out of this new one. I was looking for an "old school" front load machine which uses more than a cup of water to actually "wash" clothes. That pretty much narrowed it down to only Speed Queen and I was NOT disappointed. If you're looking for the very best front loader to handle all your washing needs without wifi and other frills and gimmicks then this is the machine for you. If you want a fake stainless steel tub surrounded by a plastic outer tub and junk then go buy pretty much any other brand. If you don't believe me about fake stainless steel tubs go run a magnet inside any other washer machine tub and you'll find that it sticks. The internals of this machine is just as beautiful as the outside with real parts that won't fail as soon as the warranty expires, Speaking of warranty, the place I bought this Speed Queen didn't even bother to try and sell me an extended warranty because they said it's a waste of money. I almost fell for the cool wifi options out there and to make things easier by dumping the entire bottle of detergent inside and let the machine automatically do the dosing but these things just create more failure points on the appliance. I also see that the sizes are getting monstrous in washing capacities without increasing the dimensions of the unit - how is this even possible? Well I guess they skimp on the insulation and other important parts which increase longevity. Customer service is top notch with Speed Queen, I've called with questions during the busiest times but they always managed to call me back pretty fast. One last thing, can you imagine the mold growing from all the detergent those machines hold when you dump the whole bottle in it? I never had mold issues with my old unit so I expect to never have a problem my new Speed Queen since I never keep the door closed unless it's washing a load and I always rinse out the soap dispenser. If you follow these simple things you will never have any mold issues which seem to be a downside of having a front load washer. Take care of a Speed Queen and you will have it for decades. The guys who delivered mine told me that they remove old working Speed Queens from peoples homes that are 30-40 years old! That speaks volumes.
Overall Rating:
Performance:
Appearance:
Value:
Impressive Build Quality
by nikoman
Submitted 06-04-23
done Yes, I would recommend this to a friend
SpeedQueen.com
I recently replaced my 21 year old front loader with a Speed Queen (FF7009WN). My old unit was not dead but it was getting old and tired so I'm hoping to get at least the same service life out of this new one. I was looking for an "old school" front load machine which uses more than a cup of water to actually "wash" clothes. That pretty much narrowed it down to only Speed Queen and I was NOT disappointed. If you're looking for the very best front loader to handle all your washing needs without wifi and other frills and gimmicks then this is the machine for you. If you want a fake stainless steel tub surrounded by a plastic outer tub and junk then go buy pretty much any other brand. If you don't believe me about fake stainless steel tubs go run a magnet inside any other washer machine tub and you'll find that it sticks. The internals of this machine is just as beautiful as the outside with real parts that won't fail as soon as the warranty expires, Speaking of warranty, the place I bought this Speed Queen didn't even bother to try and sell me an extended warranty because they said it's a waste of money. I almost fell for the cool wifi options out there and to make things easier by dumping the entire bottle of detergent inside and let the machine automatically do the dosing but these things just create more failure points on the appliance. I also see that the sizes are getting monstrous in washing capacities without increasing the dimensions of the unit - how is this even possible? Well I guess they skimp on the insulation and other important parts which increase longevity. Customer service is top notch with Speed Queen, I've called with questions during the busiest times but they always managed to call me back pretty fast. One last thing, can you imagine the mold growing from all the detergent those machines hold when you dump the whole bottle in it? I never had mold issues with my old unit so I expect to never have a problem my new Speed Queen since I never keep the door closed unless it's washing a load and I always rinse out the soap dispenser. If you follow these simple things you will never have any mold issues which seem to be a downside of having a front load washer. Take care of a Speed Queen and you will have it for decades. The guys who delivered mine told me that they remove old working Speed Queens from peoples homes that are 30-40 years old! That speaks volumes.
Overall Rating:
Performance:
Appearance:
Value:
Impressive Build Quality
by nikoman
Submitted 06-04-23
done Yes, I would recommend this to a friend
SpeedQueen.com
I recently replaced my 21 year old front loader with a Speed Queen (FF7009WN). My old unit was not dead but it was getting old and tired so I'm hoping to get at least the same service life out of this new one. I was looking for an "old school" front load machine which uses more than a cup of water to actually "wash" clothes. That pretty much narrowed it down to only Speed Queen and I was NOT disappointed. If you're looking for the very best front loader to handle all your washing needs without wifi and other frills and gimmicks then this is the machine for you. If you want a fake stainless steel tub surrounded by a plastic outer tub and junk then go buy pretty much any other brand. If you don't believe me about fake stainless steel tubs go run a magnet inside any other washer machine tub and you'll find that it sticks. The internals of this machine is just as beautiful as the outside with real parts that won't fail as soon as the warranty expires, Speaking of warranty, the place I bought this Speed Queen didn't even bother to try and sell me an extended warranty because they said it's a waste of money. I almost fell for the cool wifi options out there and to make things easier by dumping the entire bottle of detergent inside and let the machine automatically do the dosing but these things just create more failure points on the appliance. I also see that the sizes are getting monstrous in washing capacities without increasing the dimensions of the unit - how is this even possible? Well I guess they skimp on the insulation and other important parts which increase longevity. Customer service is top notch with Speed Queen, I've called with questions during the busiest times but they always managed to call me back pretty fast. One last thing, can you imagine the mold growing from all the detergent those machines hold when you dump the whole bottle in it? I never had mold issues with my old unit so I expect to never have a problem my new Speed Queen since I never keep the door closed unless it's washing a load and I always rinse out the soap dispenser. If you follow these simple things you will never have any mold issues which seem to be a downside of having a front load washer. Take care of a Speed Queen and you will have it for decades. The guys who delivered mine told me that they remove old working Speed Queens from peoples homes that are 30-40 years old! That speaks volumes.
Overall Rating:
Performance:
Appearance:
Value:
Similar In-Stock Items
CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
